Dazzle Filter Cleaning Process
Filter Cleaning Tips:
-
Always wear rubber gloves when handling your filter cartridge
-
Having 2 filter cartridges allows you sufficient time to clean the cartridge properly
-
Allow the filter cartridge to dry after cleaning to improve filter effectiveness
-
A quick source of hot water for your cleaning solution is the hot tub itself
-
Rinsing with a garden hose or under a tap is sufficient – don’t use a high pressure washer
-
Rinsing the filter cartridge with water weekly is a good maintenance practice
Cleaning Process: (recommended monthly for hot tubs with moderate use)
-
Prepare a solution of Dazzle™ Filter Cleanse and hot water (preferable) in a clean plastic pail, laundry tub or specific filter cleaning container.
Lightly used hot tub – use 200 mL of Dazzle™ Filter Cleanse for minimum 6 hours
Moderately used hot tub – use 300 mL of Dazzle™ Filter Cleanse for minimum 6 hours
Heavily used hot tub – use 400 mL of Dazzle™ Filter Cleanse for minimum 12 hours -
Remove the filter cartridge(s) from the filter housing and rinse with garden hose to remove physical debris.
-
Submerse filter cartridge(s) in the solution and allow to soak for 6 – 12 hours.
-
Once soaking is complete, remove filter cartridge from solution and rinse well with clean water from garden hose or tap. Do not use high pressure washer.
-
Allow the filter cartridge to stand until dry before putting back in use.
-
Once cleaning is complete, the used cleaning solution can be safely disposed of by pouring down the drain.
Dazzle™ Filter Cleanse:
-
An environmentally-friendly filter cleaning product. Non-toxic, readily biodegradable formula.
-
Cleans filter cartridges of common grease, oil, scale and metal deposits.
-
Dazzle™ Filter Cleanse not only cleans cartridges effectively but digests the waste, leaving a clean solution to dispose of. No further cleaning of the laundry tub, pail or filter cleaning container is required. Filter Cleanse will look after that.